Parts Drawings

PARTS DRAWING FOR TR6ND AND TR6ND-P

 

 

 *Illustrated with Plastic Uni-Shield

*Metal Guarded PTO not available with Uni-Shield

 

CAUTION!

For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.  ALWAYS REPLACE SAFETY GUARDS.

 

Stock
No.
Part
No.
Description
18230606   Snap Hitch Yoke for 540 RPM - for 1000 RPM, Order 18230621
304-0600   Uni-Shield Repair Kit
302-0600   Repair Kit Complete
177-0600   Yoke 3/4"x7/8" Rectangular for Shaft Weld
138-1214   3/4"x7/8" Rectangular Shaft
134-1214   3/4"x7/8" Rectangular Tubing
  IPS6NL Inner Plastic Guard (2-3/8" OD) with Bell. Specify Dimension L
  OPS6NL Outer Plastic Guard (2-11/16" OD) with Bell. Specify Dimension L
  IMS6NL Inner Metal Guard (2-1/8"x16 Ga.) with Bell. Specify Dimension L
  OMS6NL Outer Metal Guard (2-3/8"x14 Ga.) with Bell. Specify Dimension L
128-0600   Nylon Bearing, Thrust Washer and Snap Ring
180-0600   Yoke for Torque Tube Weld
  Dim. N Implement Yoke, Round Bore, Specify Size
230200600   Plastic Shield Stabilizer
23020602   Metal Shield Stabilizer

PARTS DRAWING FOR TR12ND AND TR12ND-P


 

WARNING!

Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.

 *Illustrated with Plastic Uni-Shield

*Metal Guarded PTO not available with Uni-Shield

 

CAUTION!

For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.  ALWAYS REPLACE SAFETY GUARDS.


Stock
No.
Part
No.
Description
18231206
Snap Hitch Yoke for 540 RPM - for 1000 RPM, Order 18231221
304-1200
Uni-Shield Repair Kit
302-1200
Repair Kit Complete
177-1200
Yoke 1"x1-1/8" Rectangular for Shaft Weld
138-1618
1"x1-1/8" Rectangular Shafting
134-1618
1"x1-1/8" Rectangular Tubing

IPS12NL Inner Plastic Guard (2-11/16" OD) with Bell. Specify Dimension L

OPS12NL Outer Plastic Guard (3" OD) with Bell. Specify Dimension L

IMS12NL Inner Metal Guard (2-1/2"x16 Ga.) with Bell. Specify Dimension L

OMS12NL Outer Metal Guard (2-3/4"x13 Ga.) with Bell. Specify Dimension L
128-1200
Nylon Bearing, Thrust Washer and Snap Ring
180-1200
Yoke 1-9/32"x1-13/32" Rectangular for Tube Weld

DIM. N Implement Yoke, Round Bore, Specify Size
23020120
12N Stabilizer Bearing

PARTS DRAWING FOR TR14ND AND TR14ND-P


 

WARNING!

Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.

 *Illustrated with Plastic Uni-Shield

*Metal Guarded PTO not available with Uni-Shield

 

CAUTION!

For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.  ALWAYS REPLACE SAFETY GUARDS.


Stock
No.
Part
No.
Description
18231406
Snap Hitch Yoke for 540 RPM - for 1000 RMP, Order 18231421
304-1400
Uni-Shield Repair Kit
302-1400
Repair Kit Complete
177-1400
Yoke 1'' x 1-1/8'' Rectangular for Shaft Weld
138-1618
1'' x 1-1/8'' Rectangular Shaft
140-1400
Torque Tubing 2'' OD x 1-13/16'' ID
194-1400
Slip Sleeve 1'' x 1-1/8'' Rectangular

IPS14NL Inner Plastic Guard (2-11/16'' OD) with Bell. Specify Dimension L

OPS14NL Outer Plastic Guard (3'' OD) with Bell. Specify Dimension L

IMS14NL Inner Metal Guard (2-1/2'' x 16 Ga.) with Bell. Specify Dimension L

OMS14NL Outer Metal Guard (2-3/4'' x 13 Ga.) with Bell. Specify Dimension L
128-1200
Nylon Bearing, Thrust Washer and Snap Ring
129-1400
12N, 14N, & 35N Stabilizer/Bearing
181-1400
Yoke for Torque Tube Weld

DIM. N Implement Yoke, Round Bore, Specify Size

PARTS DRAWING FOR TR35ND AND TR35ND-P

 

WARNING!

Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.

 *Illustrated with Plastic Guard
 

CAUTION!

For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.  ALWAYS REPLACE SAFETY GUARDS.

 

Stock
No.
Part
No.
Description
18233506   Snap Hitch Yoke for 540 RPM - for 1000 RMP, Order 18233521
02010495   Coiled Spring, Three Ball Bearings, Retaining Shell and Snap Ring
302-3500   Repair Kit Complete
177-3500   Yoke 1-3/16'' Square for Shaft Weld
136-1900   1-3/16'' Square Shafting
140-3500   Torque Tubing 2-1/8'' OD x 1-7-8'' ID
194-3500   Slip Sleeve 1-3/16'' Square
  IPS35NL Inner Plastic Guard (2-11/16'' OD) with Bell. Specify Dimension L
  OPS35NL Outer Plastic Guard (3'' OD) with Bell. Specify Dimension L
  IMS35NL Inner Metal Guard (2-1/2'' x 16 Ga.) with Bell. Specify Dimension L
  OMS35NL Outer Metal Guard (2-3/4'' x 13 Ga.) with Bell. Specify Dimension L
128-1200   Nylon Bearing, Thrust Washer and Snap Ring
129-1400   12N, 14N, & 35N Stabilizer/Bearing
181-3500   Yoke for Torque Tube Weld
  DIM. N Implement Yoke, Round Bore, Specify Size

PARTS DRAWING FOR TR44ND AND TR44ND-P


 

WARNING!

Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.

 *Illustrated with Plastic Guard
 

CAUTION!

For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.  ALWAYS REPLACE SAFETY GUARDS.


Stock
No.
Part
No.
Description
18234406
Snap Hitch Yoke for 540 RPM - for 1000 RMP, Order 18234421
02010495
Coiled Spring, Three Ball Bearings, Retaining Shell and Snap Ring
302-4400
Repair Kit Complete
177-4400
Yoke 1-5/16'' Square for Shaft Weld
136-2100
1-5/16'' Square Shafting
140-4400
Torque Tubing 2-1/2'' OD x 2-15/64'' ID
194-4400
Slip Sleeve 1-5/16'' Square

IPS44NL Inner Plastic Guard (3-1/2'' OD) with Bell. Specify Dimension L

OPS44NL Outer Plastic Guard (4'' OD) with Bell. Specify Dimension L

IMS44NL Inner Metal Guard (2-7/8'' x 16 Ga.) with Bell. Specify Dimension L

OMS44NL Outer Metal Guard (3-1/8'' x 13 Ga.) with Bell. Specify Dimension L
128-5500
Nylon Bearing, Thrust Washer and Snap Ring
129-4400
44R & 55N Stabilizer/Bearing
181-4400
Yoke for Torque Tube Weld

DIM. N Implement Yoke, Round Bore, Specify Size

PARTS DRAWING FOR TR55ND AND TR55ND-P


 

WARNING!

Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.

 *Illustrated with Plastic Guard
 

CAUTION!

For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.  ALWAYS REPLACE SAFETY GUARDS.


Stock
No.
Part
No.
Description
18235506
Snap Hitch Yoke for 540 RPM - for 1000 RMP, Order 182-5521
02015506
Pin, Spring and Keeper for 6 Spline - for 21 Spline, Order 02015521
302-5500
Repair Kit Complete
177-5500
Yoke 1-3/8'' Square for Shaft Weld
136-2200
1-3/8'' Square Shafting
140-4400
Torque Tubing 2-1/2'' OD x 2-15/64'' ID
194-5500
Slip Sleeve 1-3/8'' Square

IPS55NL Inner Plastic Guard (3-1/2'' OD) with Bell. Specify Dimension L

OPS55NL Outer Plastic Guard (4'' OD) with Bell. Specify Dimension L

IMS55NL Inner Metal Guard (2-7/8'' x 16 Ga.) with Bell. Specify Dimension L

OMS55NL Outer Metal Guard (3-1/8'' x 13 Ga.) with Bell. Specify Dimension L
128-5500
Nylon Bearing, Thrust Washer and Snap Ring
129-4400
44R & 55N Stabilizer/Bearing
181-5500
Yoke for Torque Tube Weld

DIM. N Implement Yoke, Round Bore, Specify Size