 |
- Specialty Parts/Wheel Hubs/Jacks
- Couplers & Clutches/Tubing/Threaded Rod
- PTO Drivelines & Components
- Sheaves & Pulleys
- Sprockets
 |
CNC Machining Centers - With our machining
centers, G&G provides customers with more capabilities
than ever before. Both Large and small production runs
of products requiring special bored holes, tapped holes,
countersunk holes, counter bored holes or milled surfaces
can be produced with fewer tooling charges and, in some
cases, no charges at all. |
CNCs - Close tolerance machining has become
critical in the equipment our customers are producing today.
With state-of-the-art CNC lathes, machining centers and wire
EDM, G&G can make the most modern parts with incredibly
close tolerances.
CNC Lathes - CNC turning centers give G&G
increased versatility to manufacture various products requiring
tapers, counter bores, bearing fits, internal threads and
metric bores. Materials such as cast iron, plastics, aluminum,
brass, zinc and many different exotic types of steel can be
turned up to 24” in diameter.
| CNC Burning Center -
Originally purchased to burn sprocket blanks and flame
cut sprockets, the plate-burning machine has proved
very useful for the manufacturing of many made-to-order
parts. With a burning depth of up to 12” and the
ability to cut various shapes and designs from brass,
stainless steel and aluminum, G&G’s plasma
and oxyacetylene burners can burn parts to your special
requirements. |
 |
Broaching - G&G has structured one of
the most complete broaching facilities in North America to
meet a variety of shapes and sizes required by our customers.
G&G has seven multi-station broaching centers and over
500 broaches on hand to produce round, square, hex, and various
spline bores.
|
|
Hobbing - G&G Hobbing
machines allow production of sprockets to individual
customer specifications, no matter what size or style.
In addition to sprockets, G&G can also hobb spline
shafts. With one of the largest hobbing facilities in
the country, G&G can handle all of your hobbing
needs.
Grinding - With one of the largest
grinding facilities in the Midwest, G&G has the
capability to blanchard grind flat plates, molds, weldments
and dies up to 10’ in diameter and 48” high.
G&G blanchard grinders can grind flat and parallel
while maintaining extremely close tolerances. We can
also grind shear blades and brake dies in most lengths,
and centerless grind round stock from ¼”
to 4” in diameter. |
Heat Treating - At G&G we have over
30 years of experience with in-house carburizing and induction
heating. Although a less common method of heat treating, G&G
also has the capability to anneal certain materials.
Thread Rolling - Whether it’s stock
or custom-made, G&G can meet your threaded rod requirements.
Capable of handling material up to 4” in diameter, G&G
can roll and bend parts containing various thread styles and
dimensions, not only on our standard C1018 steel, but also
in brass, stainless steel or aluminum.
|
