Parts Drawings
Parts Drawing For TR6ND And TR6ND-P
*Illustrated with Plastic Uni-Shield
*Metal Guarded PTO not available with Uni-Shield
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
CAUTION!
For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.
ALWAYS REPLACE SAFETY GUARDS.
Stock No. | Part No. | Description |
18230606 | Snap Hitch Yoke for 540 RPM - for 1000 RPM, Order 18230621 | |
304-0600 | Uni-Shield Repair Kit | |
302-0600 | Repair Kit Complete | |
177-0600 | Yoke 3/4"x7/8" Rectangular for Shaft Weld | |
138-1214 | 3/4"x7/8" Rectangular Shaft | |
134-1214 | 3/4"x7/8" Rectangular Tubing | |
IPS6NL | Inner Plastic Guard (2-3/8" OD) with Bell. Specify Dimension L | |
OPS6NL | Outer Plastic Guard (2-11/16" OD) with Bell. Specify Dimension L | |
IMS6NL | Inner Metal Guard (2-1/8"x16 Ga.) with Bell. Specify Dimension L | |
OMS6NL | Outer Metal Guard (2-3/8"x14 Ga.) with Bell. Specify Dimension L | |
128-0600 | Nylon Bearing, Thrust Washer and Snap Ring | |
180-0600 | Yoke for Torque Tube Weld | |
Dim. N | Implement Yoke, Round Bore, Specify Size | |
230200600 | Plastic Shield Stabilizer | |
23020602 | Metal Shield Stabilizer |
Parts Drawing For TR12ND And TR12ND-P
*Illustrated with Plastic Uni-Shield
*Metal Guarded PTO not available with Uni-Shield
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
CAUTION!
For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.
ALWAYS REPLACE SAFETY GUARDS.
Stock No. | Part No. | Description |
18231206 | Snap Hitch Yoke for 540 RPM - for 1000 RPM, Order 18231221 | |
304-1200 | Uni-Shield Repair Kit | |
302-1200 | Repair Kit Complete | |
177-1200 | Yoke 1"x1-1/8" Rectangular for Shaft Weld | |
138-1618 | 1"x1-1/8" Rectangular Shafting | |
134-1618 | 1"x1-1/8" Rectangular Tubing | |
IPS12NL | Inner Plastic Guard (2-11/16" OD) with Bell. Specify Dimension L | |
OPS12NL | Outer Plastic Guard (3" OD) with Bell. Specify Dimension L | |
IMS12NL | Inner Metal Guard (2-1/2"x16 Ga.) with Bell. Specify Dimension L | |
OMS12NL | Outer Metal Guard (2-3/4"x13 Ga.) with Bell. Specify Dimension L | |
128-1200 | Nylon Bearing, Thrust Washer and Snap Ring | |
180-1200 | Yoke 1-9/32"x1-13/32" Rectangular for Tube Weld | |
DIM. N | Implement Yoke, Round Bore, Specify Size | |
23020120 | 12N Stabilizer Bearing |
Parts Drawing For TR14ND And TR14ND-P
*Illustrated with Plastic Uni-Shield
*Metal Guarded PTO not available with Uni-Shield
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
CAUTION!
For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.
ALWAYS REPLACE SAFETY GUARDS.
Stock No. | Part No. | Description |
18231406 | Snap Hitch Yoke for 540 RPM - for 1000 RMP, Order 18231421 | |
304-1400 | Uni-Shield Repair Kit | |
302-1400 | Repair Kit Complete | |
177-1400 | Yoke 1'' x 1-1/8'' Rectangular for Shaft Weld | |
138-1618 | 1'' x 1-1/8'' Rectangular Shaft | |
140-1400 | Torque Tubing 2'' OD x 1-13/16'' ID | |
194-1400 | Slip Sleeve 1'' x 1-1/8'' Rectangular | |
IPS14NL | Inner Plastic Guard (2-11/16'' OD) with Bell. Specify Dimension L | |
OPS14NL | Outer Plastic Guard (3'' OD) with Bell. Specify Dimension L | |
IMS14NL | Inner Metal Guard (2-1/2'' x 16 Ga.) with Bell. Specify Dimension L | |
OMS14NL | Outer Metal Guard (2-3/4'' x 13 Ga.) with Bell. Specify Dimension L | |
128-1200 | Nylon Bearing, Thrust Washer and Snap Ring | |
129-1400 | 12N, 14N, & 35N Stabilizer/Bearing | |
181-1400 | Yoke for Torque Tube Weld | |
DIM. N | Implement Yoke, Round Bore, Specify Size |
Parts Drawing For TR35ND And TR35ND-P
*Illustrated with Plastic Guard
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
CAUTION!
For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.
ALWAYS REPLACE SAFETY GUARDS.
Stock No. | Part No. | Description |
18233506 | Snap Hitch Yoke for 540 RPM - for 1000 RMP, Order 18233521 | |
02010495 | Coiled Spring, Three Ball Bearings, Retaining Shell and Snap Ring | |
302-3500 | Repair Kit Complete | |
177-3500 | Yoke 1-3/16'' Square for Shaft Weld | |
136-1900 | 1-3/16'' Square Shafting | |
140-3500 | Torque Tubing 2-1/8'' OD x 1-7-8'' ID | |
194-3500 | Slip Sleeve 1-3/16'' Square | |
IPS35NL | Inner Plastic Guard (2-11/16'' OD) with Bell. Specify Dimension L | |
OPS35NL | Outer Plastic Guard (3'' OD) with Bell. Specify Dimension L | |
IMS35NL | Inner Metal Guard (2-1/2'' x 16 Ga.) with Bell. Specify Dimension L | |
OMS35NL | Outer Metal Guard (2-3/4'' x 13 Ga.) with Bell. Specify Dimension L | |
128-1200 | Nylon Bearing, Thrust Washer and Snap Ring | |
129-1400 | 12N, 14N, & 35N Stabilizer/Bearing | |
181-3500 | Yoke for Torque Tube Weld | |
DIM. N | Implement Yoke, Round Bore, Specify Size |
Parts Drawing For TR44ND And TR44ND-P
*Illustrated with Plastic Guard
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
CAUTION!
For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.
ALWAYS REPLACE SAFETY GUARDS.
Stock No. | Part No. | Description |
18234406 | Snap Hitch Yoke for 540 RPM - for 1000 RMP, Order 18234421 | |
02010495 | Coiled Spring, Three Ball Bearings, Retaining Shell and Snap Ring | |
302-4400 | Repair Kit Complete | |
177-4400 | Yoke 1-5/16'' Square for Shaft Weld | |
136-2100 | 1-5/16'' Square Shafting | |
140-4400 | Torque Tubing 2-1/2'' OD x 2-15/64'' ID | |
194-4400 | Slip Sleeve 1-5/16'' Square | |
IPS44NL | Inner Plastic Guard (3-1/2'' OD) with Bell. Specify Dimension L | |
OPS44NL | Outer Plastic Guard (4'' OD) with Bell. Specify Dimension L | |
IMS44NL | Inner Metal Guard (2-7/8'' x 16 Ga.) with Bell. Specify Dimension L | |
OMS44NL | Outer Metal Guard (3-1/8'' x 13 Ga.) with Bell. Specify Dimension L | |
128-5500 | Nylon Bearing, Thrust Washer and Snap Ring | |
129-4400 | 44R & 55N Stabilizer/Bearing | |
181-4400 | Yoke for Torque Tube Weld | |
DIM. N | Implement Yoke, Round Bore, Specify Size |
Parts Drawing For TR55ND And TR55ND-P
*Illustrated with Plastic Guard
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
CAUTION!
For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.
ALWAYS REPLACE SAFETY GUARDS.
Stock No. | Part No. | Description |
18235506 | Snap Hitch Yoke for 540 RPM - for 1000 RMP, Order 182-5521 | |
02015506 | Pin, Spring and Keeper for 6 Spline - for 21 Spline, Order 02015521 | |
302-5500 | Repair Kit Complete | |
177-5500 | Yoke 1-3/8'' Square for Shaft Weld | |
136-2200 | 1-3/8'' Square Shafting | |
140-4400 | Torque Tubing 2-1/2'' OD x 2-15/64'' ID | |
194-5500 | Slip Sleeve 1-3/8'' Square | |
IPS55NL | Inner Plastic Guard (3-1/2'' OD) with Bell. Specify Dimension L | |
OPS55NL | Outer Plastic Guard (4'' OD) with Bell. Specify Dimension L | |
IMS55NL | Inner Metal Guard (2-7/8'' x 16 Ga.) with Bell. Specify Dimension L | |
OMS55NL | Outer Metal Guard (3-1/8'' x 13 Ga.) with Bell. Specify Dimension L | |
128-5500 | Nylon Bearing, Thrust Washer and Snap Ring | |
129-4400 | 44R & 55N Stabilizer/Bearing | |
181-5500 | Yoke for Torque Tube Weld | |
DIM. N | Implement Yoke, Round Bore, Specify Size |